We constantly strives to provide the excellent undercarriage parts with professional service 

ShIP to

How to replace the new chain in the corresponding

by:Laike     2020-07-17
?? For some equipment, such as escalators, if the chain and chain groove are only slightly worn, the chain can be replaced when the old suspension chain is removed.
??If you remove any fixtures that connect two or more chains, such as slats, lining tiles, hoppers, etc. (unless it is sufficient to allow proper spacing between the chains). Then, disconnect the chain at the tensioned end by removing the outer link or connecting link (as needed).
?? Next, you can use the original connecting link (if possible) to fix the new chain of easy length to the old one. Care should be taken to ensure that the chain method is correct. The new fixture should be connected to the new chain, or the old fixture should be reconnected, making sure that the chain passes through the center.
?? Next, you can use the transmission device to gradually run the new suspension chain, and the old chain gradually falls.
?? When the heart chain has been sent to the conveyor, the next length that is easy to handle can be connected, this time using a new connecting link. At the same time, the old chain can be disconnected from below. Repeat until all chains are replaced.
Custom message
Contact